RIG 1   FREIGHTLINER  SWAB RIG  

Wilson draw works with 12,500’  9/16” sand line, four leveling jacks and winch.  Equipped with blocks and rod tools to pull rods.  3 man crew.

 

 

 

 

 

 

 

 

RIG 2   COOPER LTO 300 WORKOVER RIG  

Powered by 3406 CAT and 5860 ALLISON transmission, 4- axle carrier with PEMCO 96 FT 180000# derrick. Tubing Board Capacity: 2-3/8”= 16,000’,  2-7/8”= 12,000’,  3-1/2”= 9,500’,  4-1/2”=6,000’.  7/8 drill line, 4 hydraulic leveling jacks, winch, 7-1/16 3000# BOP and tubing tongs.  12,500’ 9/16” sand line.  Equipped with 2-7/8 and 2-3/8 tubing tools, 5/8,7/8,3/4 and 1’ rod tools.  4 man crew.

 

 

 

 

 

 

 

 

 

AIR 3  1500 CFM/2000 PSI MOBILE AIR PACKAGE  

Primary: 20/12 STR Series SULLAIR DRILL COMPRESSOR driven by a Series 60 14L Detroit.   Booster: ARIEL JCQ-2 driven by a Series 40 Detroit with a 3-stage custom-built heat exchanger.  Pump: F3L 1011 DEUTZ driving a KM3250 triplex with all necessary piping, tanks and chemical pumps.  The above components are mounted on a custom-built Aztec drop deck with extended neck and inverted fifth wheel for hauling via standard oilfield trucks.  Computerized Murphy control panel with solid-state fault annunciator and shutdown control system, with hour-meter designed to protect engines and compressors.

 

 

 

 

 

 

 

 

AIR 4  1500 CFM/2000 PSI MOBILE AIR PACKAGE

Primary: 20/12 STR Series SULLAIR DRILL COMPRESSOR driven by a Series 60 14L Detroit.   Booster: CIP PHT2 driven by a Series 40 Detroit with a 3-stage custom-built heat exchanger.  Pump: F3L 1011 DEUTZ driving a KM3250 triplex with all necessary piping, tanks and chemical pumps.  The above components are mounted on a custom-built Aztec drop deck with extended neck and inverted fifth wheel for hauling via standard oilfield trucks.  Computerized Murphy control panel with solid-state fault annunciator and shutdown control system, with hour-meter designed to protect engines and compressors.

 

(photo to be posted shortly)

 

 

 

 

 

 

 

RIG 5   INTERNATIONAL SWAB RIG

Hopper drawworks with 12,500’  9/16” sand line.   Four leveling jacks and winch. Equipped with blocks and rod tools to pull rods.  3 man crew.

 

 

 

 

 

 

 

 

 

RIG 6   COOPER LTO 350 WORKOVER RIG   

Powered by C-15 CAT and 8 speed CAT transmission, 4 axle carrier with PEMCO 96 FT 180000# derrick. Tubing Board Capacity: 2-3/8”= 16,000’,  2-7/8”= 12,000’,  3-1/2”= 9,500’,  4-1/2”=6,000’  1” drill line. 4 hydraulic jacks, winch, 7-1/16 5000# BOP and tubing tongs, 12,500 9/16” sand line.   Equipped with 2-7/8 and 2-3/8 tubing tools. 5/8, 3/4, 7/8 and 1” rod tools.   4 man crew.

 

  

 

 

 

 

 

 

RIG 7  HOPPER WORKOVER RIG  

Powered by 3406 CAT and 5860 ALLISON transmission. 4 axle carrier with PEMCO 96FT 180000# derrick. Tubing Board Capacity: 2-3/8”= 16,000’,  2-7/8”= 12,000’,  3-1/2”= 9,500’,  4-1/2”=6,000’, 1” drill line, 4 hydraulic leveling jacks, winch, 7-1/16 3000# BOP and tubing tongs.  12,500’  9/16” sand line.  Equipped with 2-7/8 and 2-3/8 tubing tools, 5/8,  3/4, 7/8 and 1” rod tools.  4 man crew.

 

(photo to be posted shortly)

 

 

 

 

 

 

 

RIG 8  FRANKS SWABBING RIG

Franks drawworks with 12500 FT of 9/16 sand line, 4 leveling jacks and winch. Equipped with blocks and rod tools to pull rods.  2 man crew.

 

 

 

 

 

 

 

 

 

RIG 9   2008 COOPER WORKOVER RIG Powered by C-15 CAT and 5860 ALLISON transmission, 5 axle carrier with 96’ 260,000# Harold Lee derrick. Tubing Board Capacity: 2-3/8”= 16,000’,  2-7/8”= 12,000’,  3-1/2”= 9,500’,  4-1/2”=6,000’, 1” drill line, 4 hydraulic jacks, winch, 7-1/16 3,000# BOP and tubing tongs.  12500FT of 9/16 sand line. Equipped with 2-7/8 and 2-3/8 tubing tools. 5/8, 3/4, 7/8 and 1” rod tools.   4 man crew.

 

 

 

 

 

 

 

 

 

RIG 10   CARDWELL WORKOVER RIG 

Powered by 3406 CAT and 5860 ALLISON transmission, 5 axle carrier with Cardwell 96’ 180,000# derrick. Derrick is rigged up with breakdown jacks.  Tubing Board Capacity: 2-3/8”= 16,000’,  2-7/8”= 12,000’,  3-1/2”= 9,500’,  4-1/2”=6,000’, 1” drill line, 4 hydraulic leveling jacks, winch, 7-1/16 3,000# BOP and tubing tongs. 12,500’ of 9/16” sand line. Equipped with 2-7/8 and 2-3/8 tubing tools.5/8, 3/4, 7/8 and 1” rod tools. 4 man crew.

 

 

 

 

 

 

 

 

AIR 11  1600 CFM/2000 PSI MOBILE AIR PACKAGE

Primary: 20/12 STR Series SULLAIR DRILL COMPRESSOR driven by a C-15, 15.2L Caterpillar.   Booster: CIP PHT2   3-stage driven by a Cummins QSM11, 10.8L with a 4-stage custom-built heat exchanger.  Pump: Cummins A-1700 37hp driving a model 253THP triplex with all necessary piping, tanks, chemical pumps, and flow-meter in barrels per hour.   Computerized Murphy control panel with solid-state fault annunciator and shutdown control system, with hour-meter designed to protect engines and compressors.

 

 

 

 

 

 

 

 

 

RIG 12  2006 TAYLOR WORKOVER RIG  

Powered by 3406 CAT and 5860 ALLISON transmission. 5 axle carrier with PEMCO 96FT 180,000# derrick.  Derrick is rigged up with breakdown jacks.  Tubing Board Capacity: 2-3/8”= 16,000’,  2-7/8”= 12,000’,  3-1/2”= 9,500’,  4-1/2”=6,000’, 1” drill line, 4 hydraulic leveling jacks, 2 winches, 7-1/16 3,000# BOP and tubing tongs. 12500FT of 9/16 sand line. Equipped with 2-7/8 and 2-3/8 tubing tools, 5/8,3/4,7/8 and 1” rod tools.  4 man crew.

 

 

 

 

 

 

 

 

AIR 13  1600 CFM/2000 PSI SELF-PROPELLED AIR PACKAGE

Primary: ATLAS COPCO XASE 745 SERIES DRILL COMPRESSOR driven by a C-15, 15.2L Caterpillar.   Booster: CIP PHT2 driven by a C-15, 15.2L Caterpillar with an ALLISON 5860 6-speed transmission with a custom-built heat exchanger.  Pump: Cummins A-1700 37hp driving a model 253THP triplex with all necessary piping, tanks, chemical pumps, and flow-meter in barrels per hour.   Computerized Murphy control panel with solid-state fault annunciator and shutdown control system, with hour-meter designed to protect engines and compressors.

 

  

 

 

 

 

 

 

 

RIG 14    WILSON WORKOVER RIG  

Powered by 3406 CAT and 4460 ALLISON transmission. 3 axle carrier with Wilson 72’ 120,000# derrick, Tubing Board Capacity:  2-3/8” = 6,000’   2-7/8” = 5,000’, 7/8” drill line, 4 hydraulic leveling jacks, winch, 7-1/16 3,000# BOP and tubing tongs.  12,500’ of 9/16” sand line.  Equipped with 2-7/8 and 2-3/8 tubing tools, 5/8, 3/4, 7/8 and 1” rod tools.  4 man crew. SINGLE/DOUBLE

 

 

 

 

 

 

 

RIG 15   IDECO WORKOVER RIG

Powered by 3406 CAT and 4460 ALLISON transmission, 3 axle carrier with Ideco 72’ 120,000# derrick, Tubing Board Capacity:  2-3/8” = 6,000’   2-7/8” = 5,000’  7/8 drill line, 4 hydraulic leveling jacks, winch, 7-1/16 3,000#BOP and tubing tongs. 12,500’ of 9/16” sand line.  Equipped with 2-7/8 and 2-3/8 tubing tools. 5/8, 3/4, 7/8 and 1” rod tools.   4 man crew. SINGLE/DOUBLE

 

 

 

 

 

 

 

RIG 17 2007 TAYLOR WORKOVER RIG

Powered by 3406 CAT and 5860 ALLISON transmission. 5 axle carrier with PEMCO 96’ 180,000# derrick. Tubing Board Capacity: 2-3/8”= 16,000’,  2-7/8”= 12,000’,  3-1/2”= 9,500’,  4-1/2”=6,000’, 1” drill line, 4 hydraulic leveling jacks, winch, 7-1/16 3,000# BOP and tubing tongs.  12,500’ of 9/16” sand line.  Equipped with 2-7/8 and 2-3/8 tubing tools. 5/8, 3/4, 7/8 and 1” rod tools.4 man crew.